Alarm.com ADC-VDBA-WP Video Doorbell Mounting Wall Plate
Alarm.com Video Doorbell Mounting Wall Plate for the ADC-VDB770
*AS AN AUTHORIZED ALARM.COM DEALER, THIS ITEM CAN ONLY BE PURCHASED IF YOU HAVE AN ACTIVE ALARM.COM SUBSCRIPTION WITH US OR IF YOU WISH TO SWITCH OR SIGN UP FOR NEW ALARM.COM SERVICES THROUGH US. PLEASE CONTACT US PRIOR TO PURCHASING THIS ITEM. ANY ORDERS WILL BE CANCELLED IF PRIOR AUTHORIZATION IS NOT OBTAINED.
The Alarm.com ADC-VDBA-WP Video Doorbell Mounting Wall Plate that is installed between the ADC-VDB770 and the wall. Mounting wall screws and anchors (the same type as what is included with the ADC-VDB770) are also included with each unit.
The mounting wall plate is designed to cover up existing holes or missing paint due to a previous doorbell that would not be covered by the footprint of the ADC-VDB770 itself. The mounting plate is wide enough to cover the width of a Skybell HD Wi-Fi Doorbell Camera so that any missing paint or screw holes will be covered.
- ~13.8cm x ~8.7cm
- Place the mounting plate against the mounting surface, and then do either of the following:
- Thread the mounting screws through the mounting bracket and outer (highest and lowest) holes on the wall plate.
- Thread the mounting screws through the back plate and inner holes on the wall plate.
For More Alarm.com Products Click Here