$4.99 US Flat Rate Shipping

More Categories Close Menu


More Categories Close Menu


Alula BAT-FIRE-ATT Universal CATM1 5G-Ready AT&T Commercial Fire Communicator


Universal CATM1 5G-Ready AT&T Commercial Fire Communicator  *SPECIAL ORDER ITEM


Share this product


The Alula BAT-FIRE-ATT Universal CATM1 5G-Ready AT&T Commercial Fire Communicator is for System Integrators who want a versatile fire communicator, the universal BAT-Fire is equipped with dual Tip & Ring Dial Capture and four programmable inputs/outputs with dual path IP and LTE-M cellular technology, which allows system integrators to save money, maximize install flexibility and skip the 4G cellular sunset.

  • Reduce configuration time with near universal FACP compatibility with Contact ID, dialer-capture and dialer-less FACPs.
  • Maximize flexibility with a communicator that offers both sole path cellular or IP, and dual path communications.
  • Meet local regulations with a communicator that can be configured to comply with the most recent UL & NFPA requirements.
  • Increase RMR by monitoring auxiliary building system functions with four programmable inputs and outputs
  • Simplify your day to day by using one communicator that works with all panels using Contact ID or dialer capture.
  • Minimize install complexity by using a communicator that operates at either 12V or 24V and uses minimal current to ensure backup power requirements are met.
  • Save money by eliminating the inevitable LTE/4G sunset by installing a fire communicator that’s 5G-ready.
  • Eliminate service hassles with remote programming, troubleshooting and managed over-the-air firmware upgrades.
  • Protect your investment with the industry’s best 5 year warranty.


  • Supports 12V and 24V FACPS
  • Sole path IP and dual path cellular communications
  • Alarm capture via phone line interface or standard alarm outputs
  • CAT-M1 cellular is 5G-ready
  • Supports Contact ID reporting format
  • Trouble event detection and reporting
  • Four programmable input/output points
  • At-a-glance system status via front panel LEDs
  • Certifications: UL864 10th Edition, ULC-S559, UL
    1610, ULC-S304



Housing Dimensions- 8.6 x 5.8 x 2.2 in (21.8 x 14.6 x 5.5 cm)

Weight-13.2 oz (372.9 g)

Mounting Fasteners- #6 screws and wall anchors (included)

Cover Securing Screw- #6 screw (included)

Antenna- External (included)

Device Specification

Reported Indications- Cover Tamper

Current Draw- 185 mA (Nominal) @ 12 VDC 100 mA (Nominal) @ 24 VDC

Input Voltage- 10V-27VDC


Operating Temperature- 32°F-120°F (0°C-48.9°C)

Maximum Humidity- 85% non-condensing relative humidity

Certifications- UL 864 10th Edition, ULC-S559, UL 1610, ULC-S304

BAT-Fire Configuration Guide

For more Alula products Click Here
Shopping Cart
  • No products in the cart.