alula BAT-Fire-VZ Universal CATM1 5G-Ready Verizon Commercial Fire Communicator

The alula BAT-Fire-VZ Universal CATM1 5G-Ready Verizon Commercial Fire Communicator is for System Integrators who want a versatile fire communicator, the universal BAT-Fire is equipped with dual Tip & Ring Dial Capture and four programmable inputs/outputs with dual path IP and LTE-M cellular technology, which allows system integrators to save money, maximize install flexibility and skip the 4G cellular sunset.

• Reduce configuration time with near universal FACP compatibility with Contact ID, dialer-capture and dialer-less FACPs.
• Maximize flexibility with a communicator that offers both sole path cellular or IP, and dual path communications.
• Meet local regulations with a communicator that can be configured to comply with the most recent UL & NFPA requirements.
• Increase RMR by monitoring auxiliary building system functions with four programmable inputs and outputs
• Simplify your day to day by using one communicator that works with all panels using Contact ID or dialer capture.
• Minimize install complexity by using a communicator that operates at either 12V or 24V and uses minimal current to ensure backup power requirements are met.
• Save money by eliminating the inevitable LTE/4G sunset by installing a fire communicator that’s 5G-ready.
• Eliminate service hassles with remote programming, troubleshooting and managed over-the-air firmware upgrades.
• Protect your investment with the industry’s best 5 year warranty.

KEY FEATURES:

• Supports 12V and 24V FACPS
• Sole path IP and dual path cellular communications
• Alarm capture via phone line interface or standard alarm outputs
• CAT-M1 cellular is 5G-ready
• Supports Contact ID reporting format
• Trouble event detection and reporting
• Four programmable input/output points
• At-a-glance system status via front panel LEDs
• Certifications: UL864 10th Edition, ULC-S559, UL
  1610, ULC-S304

SPECIFICATIONS:

Physical

Housing Dimensions- 8.6 x 5.8 x 2.2 in (21.8 x 14.6 x 5.5 cm)

Weight-13.2 oz (372.9 g)

Mounting Fasteners- #6 screws and wall anchors (included)

Cover Securing Screw- #6 screw (included)

Antenna- External (included)

Device Specification

Reported Indications- Cover Tamper

Current Draw- 185 mA (Nominal) @ 12 VDC 100 mA (Nominal) @ 24 VDC

Input Voltage- 10V-27VDC

Environmental

Operating Temperature- 32°F-120°F (0°C-48.9°C)

Maximum Humidity- 85% non-condensing relative humidity

Certifications- UL 864 10th Edition, ULC-S559, UL 1610, ULC-S304

BAT-Fire Configuration Guide