Qolsys QC0008-840 IQ Card-PG PowerG 915 MHz Daughter Card
$39.99
The IQ Card-PG can be installed in to “Slot 1” of your IQ Panel 4, IQ4 Hub or IQ4 NS to enable support of PowerG sensors.
Description
The Qolsys QC0008-840 IQ Card-PG PowerG 915 MHz Daughter Card can be installed in to “Slot 1” of your IQ Panel 4, IQ4 Hub or IQ4 NS to enable support of PowerG sensors. The Qolsys QC0008-840 IQ Card-PG is a high-performance, secure, and reliable access control card that is ideal for use in a variety of applications. It is compatible with the Qolsys IQ Panel, and it can be used to control access to doors, gates, and other secure areas.
Swipe down and touch “Settings” then “Advanced Settings”. Enter your code and touch “POWER DOWN”.
Once the IQ Panel has completely powered down, unplug or disconnect the power by removing the barrel jack connector inside the panel or by unplugging the power supply. NOTE: it is NOT required to disconnect the battery.
Swipe down and touch “Settings” then “Advanced Settings”. Enter your code and touch “System Tests”.
Touch “Daughter Cards Test”.
Run the “PowerG” test. Allow up to 2 min for the panel to successfully test the radio in the new IQ Card. If test fails, reboot the panel and try again.
The IQ Panel will automatically recognize the newly-installed IQ Card-PG and it is now ready to use.
See more Qolsys Products Click Here
