$4.99 US Flat Rate Shipping

ALL CATEGORIES
More Categories Close Menu

Cart

ALL CATEGORIES
More Categories Close Menu

Categories

GoControl WD500Z5-1 Z-Wave Wall Dimmer Switch

GoControl Z-Wave Wall Dimmer Switch

This product has been discontinued
SKU: WD500Z5-1 Category: Tags: ,

Share this product

Description

The GoControl WD500Z5-1 Z-Wave Wall Dimmer Switch allows remote ON/OFF control and dimming of connected lights. The Z-Wave Wall Mount Dimmer is easily wired in place of a standard wall dimmer. This device requires a Neutral connection.

The Wall Mounted Dimmer integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).

Auto-Sense:

Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status.

Note to Installers: When installing a Z-Wave 3-Way Light setup utilizing Nortek Security & Control products, you will need a Load Bearing switch (WS15Z-1, WD500Z-1 or WD1000Z-1) and a non-load bearing WT00Z-1. Multiple WT00Z-1 switches can be utilized to control multiple Load Bearing devices. Please refer to the linked Technical Bulletin on Z-Wave 3-Way Light Switch Setup for more information.

Specifications

  • Maximum Load: 500 Watts for control of permanently installed lighting fixtures only (Not for control of receptacles)
  • Signal (Frequency): 908.42 MHz
  • Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device
  • Input: 120v 15A 60Hz
  • Network wide inclusion
  • Scene: Command class
  • Security beaming
  • Requires a Neutral
  • Auto-Sense feature built-in
  • Replaceable trim ring design
  • Click here for more GoControl Products
Shopping Cart
  • No products in the cart.