Linear GoControl WS15Z5-1 Z-Wave Smart Wall Switch

Description

The Linear GoControl WS15Z5-1 Z-Wave Wall Switch allows remote ON/OFF control of loads connected to the switch, and is easily wired in place of a standard wall switch. The Switch integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).

Replaceable Trim Ring

The WS15Z5-1 Wall Mount Switch has a field replaceable trim ring – the color of the device can be altered with the Trim Ring Kit model in black, brown, almond and ivory.

SPECIFICATIONS

• Load: Resistive: 15 amps (1800 watts) max., 120 VAC Motor: 1/2 H.P. maximum, 120 VAC Incandescent: 600W maximum, 120 VAC
• Signal (Frequency): 908.42 MHz, 9.6Kbps or 40Kbps capable
• Range: Up to 100 feet between the wireless controller and/or the closest Z-Wave device
• Input: 120v 15A 60Hz
• Z-Wave Version 4.55
• Network wide inclusion
• Scene: Command class
• Security beaming
• Requires a Neutral
• Replaceable trim ring design

Technical Bulletin: Z-Wave 3-Way Light Switch Setup (.pdf)

Note to Installers: When installing a Z-Wave 3-Way Light setup utilizing Nortek Security & Control products, you will need a Load Bearing switch (WS15Z-1, WD500Z-1 or WD1000Z-1) and a non-load bearing WT00Z-1. Multiple WT00Z-1 switches can be utilized to control multiple Load Bearing devices. Please refer to the linked Technical Bulletin on Z-Wave 3-Way Light Switch Setup for more information.